Hogwarts Crest
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Public Domain
This is a layered Hogwarts sigil relief, designed specifically for clean FDM printing and post-processing finishes like Rub ’n Buff, paint, or wood mounting.
The model was printed at 0.2 mm layer height using a 0.6 mm nozzle, which intentionally leaves subtle layer lines to enhance the brushed-metal look when finishing the raised crest. The base print shown was produced in Elegoo PLA Matte, chosen for its low sheen and excellent contrast under metallic rubs.
The sigil is optimized for:
Strong edge definition
Clean text readability
Minimal stringing in recessed details
Recommended print settings:
Layer height: 0.2 mm
Nozzle: 0.6 mm
Material: PLA / PLA Matte
Walls: 3+
Infill: 10–15% (gyroid or cubic)
No supports required
This model works especially well when mounted on a wood or wood-PLA backing, with the crest finished separately for a metal-inlay effect. Ideal for wall art, decorative shields, or display pieces.
You can see how I did the post processing on Tiktok @ae3d.designs!