FUNNEL PARADISE | Funnel Factory (fully parametric)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Generate funnels of any kind by simply typing the required parameters into OpenSCAD
- Rating
- 5 / 5
- Likes
- 45
- Downloads
- 174
- Makes
- 2
- Views
- 414
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Welcome to FUNNEL PARADISE !
Generate funnels of any kind by simply typing the required parameters into OpenSCAD. Almost all parameters can be changed.
The main parts of the funnel used in the OpenSCAD script are named as follows:
HOOK: The hook is an optional feature, it is available in two variants: classic (as shown above) and circular. Alternatively, the hook can be converted into a finger tab by selecting the “solid” option in the script.
RIM: The rim can make filling easier, especially when using a wide-mouth funnel without a spout.
To disable the rim entirely, set the rim parameter to 0.OPENING: The opening forms the main body of the funnel and is always required.
SPOUT: The spout is optional and available in two versions: slant-cut and straight-cut.
The cut angle can be adjusted as needed.
Recommended Print Settings
Supports: No (place the funnel with the rim facing the print bed)
Brim: optional (use for very thin and small funnels)
Examples of main funnel types
Funnel with slant-cut spout | Funnel with straight-cut spout | Wide-Mouth Funnel |
|---|---|---|
 |  |  |
Model Files
The model file names indicate the funnel size using the following format:
*_openingDiameter-overallHeight-spoutDiameter
For example: Classic_Funnel_60-80-8
- opening diameter: 60mm
- overall height: 80mm
- spout diameter: 8mm
Enjoy modelling and printing. Please let me know if you encounter any issues or you have the need for specific funnel sizes
Updates:
- 28/01/2026: the hook-methods were completely reworked in the OpenSCAD script (v1.1)