Ikea Antifoni Lamp Head Replacement
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
2 part replacement head for the Ikea Antifoni desk lamp
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 7
- Makes
- 1
- Views
- 49
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
This is a 2 part print to make a replacement head for the Ikea Antifoni desk lamp. (It might also work for the Antifoni floor lamp, but hasn't been tried.)
The original heads on these lamps eventually degraded from the heat of the halogen bulbs, and would crack and eventually fail. These 2 almost mirror image parts together create a new head. The old 2 piece head can be replaced easily by unscrewing it from the arm and removing the shade. The brass contacts, wire, switch, and bi-pin socket will come out of the head by rotating the contacts and sliding them out; the assembly installs the same way into the new head. No need to glue the halves together, they're held in place by the arm screw.
NOTE: this head should only be used with LED bulbs! Incandescent and halogen bulbs will get too hot for most 3d printing filament materials.