Tonuino case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Implementation of the tonuino project: https://www.voss.earth/tonuino/ Parts used: 24mm arcade buttons poweradd slim 2…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 15
- Makes
- 0
- Views
- 402
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution
Implementation of the tonuino project: https://www.voss.earth/tonuino/
Parts used:
- 24mm arcade buttons
- poweradd slim 2 powerbank -> broken open to access 5V USB (top plate needs quite some force to remove, is friction fit)
- 50mm speaker
- standard "19,2 x 12,9 mm" switch for the 5V from the powerbank
- M3 Nuts and bolts (nut inserts)
Important since the original PCB didn't arrive in time a 70x30mm protoboard like this was used: https://www.amazon.it/Basetta-Millefori-Vetronite-piastra-Prototype/dp/B075W1H2TL
Also you may want to use a powerbank that is easier to misuse... I basically cut mine open
After assembly a piece of felt was cut to size and attached via double sided tape, on the felt a stitched cross marks the RFID patch
Update after a couple of months:
- Add hotsnot to the speaker and any other things that have mass (powerbank)
- use proper jumper wires with 1/10" molex style connectors, those chinese ones with round plug are too thin
- use proper wires in general
Category: Toys & Games