Thermalright AXP90-X53 - 115X - Bracket Spacers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mainboard bracket spacers to allow for full tightening of the cooler bracket without risk of cracking.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 19
- Makes
- 0
- Views
- 279
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- GNU General Public License v3.0
These spacers close the gap between the cooler bracket (CPU side) and the mainboard. Without them, there is risk in flexing/cracking the board if over tightened.
Designed for a ASRock Rack 1151 ITX board, these may or may not be the right height for other boards.
Design assumes the foam pads on the studs remain in place.
Small lip built in to help with hole alignment in the mainboard.
Allows for full tightening of the cooler bracket nuts, while maintaining enough of a gap for thermal paste distribution.
Printed in fine layers.