Face to the Mat Paraphernalia
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
For use with Face to the Mat from PLAAY Games
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 10
- Makes
- 0
- Views
- 114
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Public Domain
Print a sleeve-face and sleeve-back for each wrestler in your federation. You may want to use different colors for your wrestlers. For example:
- Heels can be black
- Faces can be white
- Champions can be gold
- Tag team partners can be in the same color
Print the sleeve-face model face up on the print bed. No supports are necessary. I print at 0.3 mm resolution on a 4mm nozzle with PLA with 20% infill, but other parameters and filaments should work too.
Print the sleeve-back vertically with the bottom of the sleeve on the print bed. You may want to print with a brim. No supports are necessary. I print at 0.3 mm resolution on a 4mm nozzle with PLA with 20% infill, but other parameters and filaments should work too.
Two sizes of storage tray are provided along with the divider. You may want multiple dividers per tray, but only one is necessary.
I have provided a very basic lid for the trays, but personally, I don’t use a lid.