ZimaBoard 2 Wall mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wall mount for ZIMA BOARD2 and two 2.5" HDD drives. Only screws are to fix holder on the wall, all other does not need…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 44
- Makes
- 0
- Views
- 395
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Public Domain
Wall mount for ZIMA BOARD2 and two 2.5" HDD drives. Only screws are to fix holder on the wall, all other does not need any screw, just put ZimaBoard in a slot, from a top HDD drives also. All cables and connectors are free to be plugged - are not covered. It side has hole on a side to see if ZimaBoard2 has power. All done in OnShape by PTC.
20.3.2026 Update
I added desk stand, no screw needed, just put enclosure in the stand and that is it, no screw needed.
Print settings : AzureFilm PETG, 0,3 mm layer height
Nozzle diameter : 0,6mm Printed standing up 4 Walls No top and bottom layers honeycomb infill 25%
Category: 3D Printing