1 / 3
Semi-hydroponic planter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A stylish planter suitable for semi-hydroponic growing
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 23
- Makes
- 0
- Views
- 109
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Open Community License v1
🌱 Semi-Hydroponic Planter
A simple semi-hydroponic planter with a two-part design:
outer ribbed pot (water reservoir)
inner cup with drainage holes for the plant and substrate
Designed for use with LECA and other semi-hydroponic setups.
🖨 Printing
Material: PLA
Nozzle: 0.8 mm (layer width 1mm)
Layer height: 0.2–0.4 mm
Infill: 0%
Supports: No
Printed and tested with a 0.8 mm nozzle. And Arachne perimeter generator!