Magnetic Phone Mount for Sony DSC-QX10
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Magnetic phone attachment plate for Sony DSC-QX10
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 45
- Makes
- 0
- Views
- 124
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution
This is a mount adapter plate for the Sony DSC-QX10 phone-back camera, allowing it to be magnetically attached to recent IPhone and similar phones with circular magnetic attachment points on back. This mount utilizes the existing mounting connections on the back of the camera module.
Requires ten 8x1.75mm round magnets.
Print with PETG (suggested) with the non-magnet side on the build plate. 0.2mm layer height and 20% infill. Utilize automatically generated organic supports. Once printed, carefully remove the supports from the camera mounting slots using a dental pick or similar.
When inserting magnets, first check the best orientation of the magnets on the back of your phone. You may find that a north or south orientation will give a different preferential radius. The mount is designed for the magnets at a diameter of 45mm, so pick whatever orientation gets you closer to this radius. Make sure and mount all the magnets with the same orientation. The magnets should be a tight fit, but a little CA glue is highly recommended.