1 / 1
WH40K Colosseum Walls
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple Colosseum Terrain
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 46
- Makes
- 0
- Views
- 216
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props & Terrains
- License
- Creative Commons — Attribution — Noncommercial
You need 4x of each file for a complete terrain set.
Added little supports just for stability and windows on exterior walls to reduce a little the filament usage.
The perimeter requires a large print table of at least 220 x 220 mm.
Since the project is very simple, settings do not matter that much.
Personally printed in PLA+ with:
-0.4 nozzle, T after first layer at 205°C (worked for me to prevent bendings)
-0.2 layer height
-2 walls
-3 top and bottom shell layers
-set infill to 7 to 10%, you don't need much.