1 / 5
Tiny-X-150
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
It is a Voron Trident–based printer with a build volume of 150 × 150 × 150 mm.
The design is a mix of Voron Trident, Tiny-T, Ratrig, and custom original designs.
The electronics, which were previously concentrated in the bottom of the printer, have been relocated to the rear, while the 24 V and 48 V SMPS units are installed in the lower section.
To enable high-temperature (55–60 °C) and high-speed printing, a PTC heater and a CPAP system are installed inside the chamber.