On The Go Jewelry Storage!
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.28 – €0.34 net (excluding VAT)
For file: Bumper Mold_0.4n_0.2mm_PLA_MK3.9_15m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.31 excluding VAT (range midpoint).
- Weight reported by the author
- 5 g
- Print time reported by the author
- 15 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
My girlfriend needed a way to hold her jewelry with tangles while she went to workout classes, here it is!
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 28
- Makes
- 0
- Views
- 390
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Women
- License
- Creative Commons — Attribution — Noncommercial
What is it?
My girlfriend does a lot of workout classes and needed a way to safely store her Jewelry when she takes it off before the class. It needed to protect from tangles and be easy to open and close.
What options are available?
I've built out three options initially which you can choose on depending on your need and your printer's ability! I've also included the STEP file so you can make your own edits to customize it with new sizes, decals, etc. There is also a printable mold for casting a bumper out of silicone
 |  |
|---|
Print-in-Place Hinge Edition
This is the standard option you should choose, with an easy print-in-place hinge design (0.25mm tolerances required). You'll then add in 2x 8mm magnets and 2x TPU bumpers which help to keep the jewelry from rattling and tangling.
Valentines Day Print-in-Place Hinge Edition
This is a fun Valentines Day themed version with a large heart on the top case. Otherwise it is identical to the print-in-place hinge design (0.25mm tolerances required). You'll then add in 2x 8mm magnets and 2x TPU bumpers which help to keep the jewelry from rattling and tangling.
M3 Hardware Hinge Edition
This is the standard option, but with the option to use M3 hardware (1x M3-16mm screw and heat-set insert) in case you don't like print-in-place hinges. You'll then add in 2x 8mm magnets and 2x TPU bumpers which help to keep the jewelry from rattling and tangling.
