Original PLA Blitzball V3 (Final Version)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This blitzball is the exact 3x3x3 in size of an original blitzball and weighs the same. Used mainly for pitching!
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 207
- Makes
- 0
- Views
- 447
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
This Blitzball is mainly used for pitching as it can survive impacts to the ground, but be careful when using it for batting as the ball could explode if hit hard enough (Personal Experience). The ball moves in the air like a regular blitzball, so all of your pitches will still move just as much.
Printed in PLA +, but normal PLA and PLA silk works fine.
Print Settings
Layer Height: 0.25mm (Any size works for 0.25mm is best for speed)
Wall Loops: 3
Infill Density: 3% (Is low but useful for getting the right weight and still gives the ball strength)
Infill Pattern: Gyroid
Supports: Yes (So it can stay on the buildplate and allow it to be stable.
Support Overhang Threshold: 40 (Gives the ball more stability on the printer
Top Contact Z Distance: 0.1 (Allows for detachability but keeps it stable on the supports)