LayersFactory
Report model
1 / 5
16-key Macro Pad with rotary encoder and LCM — image 1
1 / 5

16-key Macro Pad with rotary encoder and LCM

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Jack Lee

Jack Lee

@JackLee_3383391

A small macro keyboard programmed using Arduino, featuring a 4x4 programmable key set, knobs, and a 1.9-inch LCM display

Rating
0 / 5
Likes
5
Downloads
16
Makes
0
Views
223
Reviews
0

Updated at source:

Model information

Source
Printables
Category
Electronics
License
Creative Commons — Attribution — Noncommercial
DetailsFiles (4)Makes & comments (Makes: 0) (Comments: 0)Remixes (0)Collections (9)Related

Printer Brand: Bambu

Printer: X1C

DIY PCB  schematic and gerber: 

https://www.pcbway.com/project/shareproject/DIY_16_keypad_1_rotary_encoder_1_9_inch_tft_lcd_8e749933.html

Hardware needed

  1. x16 mechanical switch of your choice

  2. x16 mechanical switch socket: CPG151101S11-16

  3. x16 SMD Diodes: 1N4148W-7-F Switching Diodes, SOD-123 Package

  4. x16 SMD RGB LED: YO-WS2812B-3528 or SK6812MINI-E

  5. x16 SMD Capacitor: 0.1uf 16V 0805

  6. x4 M2x10 screws

  7. x4 10mm rubber pad

  8. x2 SMD Resistor: 0R 0402 or 30 AWG Wrapping Wire

  9. x1 Waveshare RP2040-Zero microcontroller

  10. x1 1.9-inch LCM display: SPI 1.9 TFT LCM module

  11. x1 Rotary Encoder: PEC11R-4215F-S0024 or EC11E15244G1

  12. x1 Knob

  13. x1 1x4 Pin Right Angle 90° Male Pin Header - Pitch 2.54mm

  14. x1 1x8 Pin Female Header - 2.54mm Pitch

  15. x1 Solder iron and solder wire

  16. x1 A computer with your programming suite of choice and plenty of patience

  17. x1 DIY 16 keypad PCB

Tags

keypadlcmmarco16key