Drill Press Dust Collection
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a holder I created for a 2.5" hose that I could mount to my drill press for dust collection when drilling. The…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 8
- Makes
- 0
- Views
- 124
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
This is a holder I created for a 2.5" hose that I could mount to my drill press for dust collection when drilling. The mount swivels in the middle to any angle needed. This is accomplished with a nylon washer between the halves of the mount. There is a 1/4-20 bolt in the middle with washers and a locknut to keep enough tension so the holder doesn't move on its own. The hose mount part uses 1/4-20 bolts with some little knobs I had lying around. You'll need Three 1/4-20 by 2" bolts, two 1/4" regular washers and one nylon, plus a 1/4" locknut. You can opt to use knows like I did or some more 1/4" nuts. The only other piece needed is a hose clamp large enough to fit around the drill press column. 2.5" worked for me. Drill Press shown is a Wen 12"
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
Yes
Resolution:
any
Infill:
any
Category: Machine Tools