1 / 3
NSHL468 Network Tester Gridfinity
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A custom Gridfinity insert designed to securely hold a two-piece RJ45/RJ11 network cable tester. Keeps both the master a
- Rating
- 4 / 5
- Likes
- 6
- Downloads
- 40
- Makes
- 1
- Views
- 118
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Material: PLA (PETG also works)
Layer Height: 0.2 mm
Infill: 15–20% (Grid / Gyroid)
Perimeters/Walls: 3 walls
Top / Bottom Layers: 4–5
Supports: Not required
Build Plate Adhesion: None (brim optional if needed)
Orientation: Print flat on the bottom
Nozzle: 0.4 mm