Duet Laser Filament Sensor Eclosure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I created this sensor case to enable a full retract of the remainder of filament after the filament out sensor is…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 5
- Makes
- 0
- Views
- 181
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
I created this sensor case to enable a full retract of the remainder of filament after the filament out sensor is tripped. The case has two e3d heat breaks with conical entries for ease of getting filament through. at the end is has a ptfe quick connect for easy connection to the existing tube on my printer. The images are of a white case. This because my printer is all white. I did paint the inside of the "laser chamber" black.
Printing it in black is probably an easier route.
Duet Laser sensor v2 https://www.filastruder.com/collections/electronics/products/duet-filament-sensor
M6 4040 t-nut https://www.amazon.com/IZTOSS-200PCS-Assembly-Aluminum-Profile/dp/B072MGFR9K/ref=as_li_ss_tl?keywords=m6+4040+t+nut&qid=1565999482&s=gateway&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUExVVZDMTI3UVNENzIzJmVuY3J5cHRlZElkPUEwMjg5MTcwM09SRlQ0UjFZMVdWWCZlbmNyeXB0ZWRBZElkPUEwMTk5ODkxMUYyQUg0Q0RSQ04zWiZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=&linkCode=sl1&tag=instruct03-20&linkId=9ca01c060f5738c8afac019b97e94509&language=en_US
e3d v6 heat break (2x) https://www.amazon.com/IZTOSS-200PCS-Assembly-Aluminum-Profile/dp/B072MGFR9K/ref=as_li_ss_tl?keywords=m6+4040+t+nut&qid=1565999482&s=gateway&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUExVVZDMTI3UVNENzIzJmVuY3J5cHRlZElkPUEwMjg5MTcwM09SRlQ0UjFZMVdWWCZlbmNyeXB0ZWRBZElkPUEwMTk5ODkxMUYyQUg0Q0RSQ04zWiZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=&linkCode=sl1&tag=instruct03-20&linkId=9ca01c060f5738c8afac019b97e94509&language=en_US
ptfe push in quick connect M6 https://www.amazon.com/IZTOSS-200PCS-Assembly-Aluminum-Profile/dp/B072MGFR9K/ref=as_li_ss_tl?keywords=m6+4040+t+nut&qid=1565999482&s=gateway&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUExVVZDMTI3UVNENzIzJmVuY3J5cHRlZElkPUEwMjg5MTcwM09SRlQ0UjFZMVdWWCZlbmNyeXB0ZWRBZElkPUEwMTk5ODkxMUYyQUg0Q0RSQ04zWiZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=&linkCode=sl1&tag=instruct03-20&linkId=9ca01c060f5738c8afac019b97e94509&language=en_US
Print Settings
Printer:
C3Dt/cxy
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
15%
Filament:
amazon PETG
white Post-Printing =============
There are four 16mm m3 hex socket nuts that go through the enclose (and sensor) and connect to 4 m3 nuts in the back.rnrn
Category: 3D Printer Accessories