FT5 Full Graphic Controller Angeled Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A angled bracket and faceplate to mount a full graphic smart controller on the FolgerTech FT-5. Tilted at 30 degrees,…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 13
- Makes
- 0
- Views
- 156
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A angled bracket and faceplate to mount a full graphic smart controller on the FolgerTech FT-5.
Tilted at 30 degrees, it helps with usability and screen readability if you have your FT5 sitting on a low table, but also works any many other situations.
You will need two M4 screws or bolts to connect the faceplate to the bracket. The bolts will tap directly into the bracket without nuts. You can add an optional M4 bolt and t-nut to attach the upper faceplate ear to the frame for stability. You can reuse the M5 bolts and t-nuts from the factory LCD mount.
The faceplate has cutouts to clear the piezo speaker, contrast adjustment pot and LCD pins so everything sits flush.
The emergency stop button has a guard to prevent accidental activation.
All STL files have been repaired, oriented and are ready to print.
This could also work on other 2020 extrusion framed printers.
Print Settings
Printer:
FolgerTech FT5
Rafts:
No
Supports:
Doesn't Matter
Resolution:
0.3mm Layers
Infill:
20% or More
Notes:
The faceplate model may need supports depending on how will you have bridging dialed in.
Print the bracket with 3 or 4 outlines and 25% infill for strength.Category: 3D Printer Parts