1 / 1
KE Arms Takedown Pin Picatinny Holder — image 1

KE Arms Takedown Pin Picatinny Holder

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A simple holder for the KP15s takedown pins. No, I'm not going to "just" put them back into the takedown holes.

Rating
0 / 5
Likes
1
Downloads
4
Makes
0
Views
39
Reviews
0

Updated at source:

Model information

License
Creative Commons — Public Domain

I got really really sick of the pins on the kp15 being loose without a place to put them. If the Germans figured out pin retainer holes in 1943, we can do it in 2023 and beyond.

Very quick and dirty model made in pure blender, tested to fit with PLA but I didn't have any screws or nuts around - designed for M3 screw and nut, the screw has to be at least 30mm long. Feel free to edit or remix to make it better.

Should be 30mm wide from side to side.


Print so the rail is facing up and down @ 102% scale for easy rail fit. Clean up with 1/4" drill bit for the pin holes and 3/32" for the screw holes. I recommend printing in heat resistant filament and probably using 3+ walls, 80% or higher infill if you're going to use this seriously.

Tags