1 / 2
Lockwood 334B Ergo Grip
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An ergo grip for the Lockwood 334B padlock.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 8
- Makes
- 0
- Views
- 56
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
This design is based on the 29mm Mortise Lock Holder by imagitronics, which in turn is based on the Universal Lock Holder by Trekmaster30. Much like its predecessor, this was made entirely from scratch rather then being a remix. It takes an m3 nut and m3x45mm bolt. Tolerances are tight so depending on how accurate your printer is you may need to scale the model up slightly.
Print is in Sunlu PLA+ 2.0 Sunny Orange with a 0.15mm width fuzzy skin on the outside for grip.