1 / 6
E3D Titan Mount for Prusa i3 Mk2-style X Carriage — image 1
1 / 6

E3D Titan Mount for Prusa i3 Mk2-style X Carriage

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

I've built yet another Prusa i3 clone, and I decided to use mostly the parts from the Original Prusa i3 Mk2 for my…

Rating
0 / 5
Likes
1
Downloads
17
Makes
0
Views
335
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

I've built yet another Prusa i3 clone, and I decided to use mostly the parts from the Original Prusa i3 Mk2 for my printed parts. Well, some parts needed modification, and since I wanted to use my MendelMax's E3D Titan instead of the stock extruder setup...

Description

This is designed to mount a ~2cm "pancake" stepper motor and E3D Titan extruder onto the Prusa i3 Mk2's X carriage. The X carriage I use started out life as the one available for the Original Prusa i3 Mk2. All I did was chop parts from the top and bottom that related to the stock extruder.

On my machine, this mount (with near-stock X ends and carriage for the Mk2) gives me a build height of ~190mm and full access to the 213x200mm glass plate that I print on.

Notes

The extruder motor mount can easily lose a millimeter on either side, to more snugly fit the motor. It works perfectly fine as-is though.

The hobbed gear for the extruder has approximately a millimeter between it and the mount. If your printer over-extrudes, you may need to file this a bit to let the gear turn freely.

Caveat emptor, as I don't actually own an Original Prusa i3 Mk2 to test this on.

Print Settings

Printer Brand:

Solidoodle

Printer:

Solidoodle 4

Rafts:

No

Supports:

No

Resolution:

0.3mm

Infill:

35%

Notes:

Printed with IC3D 1.75mm natural ABS filament.

Print with moderately high infill for strength, even though the pancake stepper + Titan + E3D Lite6 weighs almost nothing, it'll make installation easier and prevent future issues.

How I Designed This

Designed with OpenSCAD.

Category: 3D Printer Parts

Tags