1 / 3
Filamentdurchführung für das „PrintClosure Project”/ Filament feedthrough for the “PrintClosure Project” — image 1
1 / 3

Filamentdurchführung für das „PrintClosure Project”/ Filament feedthrough for the “PrintClosure Project”

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Preliminary estimate for PETG

€0.72 – €0.88 net (excluding VAT)

For file: Staubschutz_0.4n_0.2mm_PETG_MK3.5_47m.bgcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €0.80 excluding VAT (range midpoint).

Weight reported by the author
11 g
Print time reported by the author
47.4 min
Source material
PET
Estimate material
PETG
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

Führt das Filament in das Gehäuse/ Feed the filament into the housing

Rating
0 / 5
Likes
1
Downloads
12
Makes
1
Views
42
Reviews
0

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial — Share Alike

Das Modell ermöglicht es, das Filament in das Gehäuse des „PrintClosure Project” zu bringen. Der Deckel meines Gehäuses ist 3 mm dick (ich habe Acrylglas verwendet) und es ist eine Bohrung mit einem Durchmesser von 14 mm erforderlich.

Im Inneren wird ein knapp 10 mm langer PTFE-Schlauch mit einem Außendurchmesser von 4 mm (Innendurchmesser 2,5 mm) eingesetzt, damit das Filament gut gleitet.

Zusätzlich ist ein optionaler Staubschutz enthalten.

Translation: DeepL

The model allows the filament to be fed into the housing of the “PrintClosure Project.” The cover of my housing is 3 mm thick (I used acrylic glass) and requires a hole with a diameter of 14 mm.

Inside, a PTFE tube just under 10 mm long with an outer diameter of 4 mm (inner diameter 2.5 mm) is inserted so that the filament slides smoothly.

An optional dust cover is also included.

Tags