BLUM slim pull-out infill
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
infill for pull-out
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 72
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This the slim pull-out infill for BLUM consists of 3 parts, left and right sidewall and backwall. Height 170mm, Depth 532mm
What you will need
screews M3x30, M3x10
second glue + activatorspray
double side adhesive tape
color spray (Im was used blue)
3D Print
Filament PLA infill 20-30%, base 30%, bed 60, nozzle 225
Rightwall
Detail for rightwall base this is inportant, As you can see in the picture, there is a slight bevel.
Leftwall
detail for leftwall base, as you can see in the picture, there is a slight bevel.
Backwall
You will need glue to glue all the parts together.
Im used this one
detail for leftwall base
For better stability of the bases, stick double-sided adhesive tape on the bottom
Front panel Reinforcement
