Chromecast Remote Wall Mount / Holder – Minimalist & Secure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Minimalist Chromecast remote holder. Snug fit; may require light sanding. Tested on Prusa XL/Core One/MK4S.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 8
- Makes
- 0
- Views
- 30
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Living Room
- License
- Creative Commons — Attribution
Chromecast Remote Wall Mount / Holder – Minimalist & Secure
Keep your entertainment setup organized with this clean, minimalist Chromecast Remote Holder. This wall-mountable sleeve is designed specifically for the modern Chromecast remote, providing a snug, friction-fit home so you never have to dig through couch cushions again.
The design features a smooth, arched profile that complements the aesthetic of your living room while maintaining maximum structural integrity for 3D printing.
🛠 Tested & Proven
This model features tight tolerances for a perfect "slide-in" feel, verified on top-tier Prusa hardware:
Prusa XL
Prusa Core One
Prusa MK4S
📏 Print Settings
Orientation: Print vertically on the flat back for the smoothest interior and maximum strength.
Layer Height: Tested at 0.1mm and 0.2mm.
Infill: 15% is sufficient.
Perimeters: 3 walls for durability.
Support: No supports required if printed on its back!
🔧 Mounting & Finishing
Adhesive: Designed for mounting with 3M Command strips or double-sided tape.
Fit: Features a slight internal taper to ensure the remote stays seated.
Note: Depending on your printer's calibration and filament expansion, it may require some light sanding on the interior surfaces to achieve your preferred "perfect" slide fit.