Book page holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
📖 3D Book Page Holder Model – STL File Sell a ready-to-print 3D model of a book page holder (STL file) that keeps your
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 32
- Makes
- 0
- Views
- 67
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Public Domain
⚙ Settings and Manufacturing Instructions – 3D Book Page Holder
Printer Settings:
Material: PLA (recommended), PETG also works
Layer height: 0.2 mm (fine: 0.1 mm, fast: 0.3 mm)
Infill: 15–25% (grid or gyroid)
Wall thickness: 1–1.5 mm (2–3 perimeters recommended)
Supports: Minimal; only for overhangs if needed
Nozzle temperature: PLA: 200–210 °C, PETG: 230–250 °C
Bed temperature: PLA: 50–60 °C, PETG: 70–80 °C
Print speed: 50–60 mm/s (slower for better quality)
Printing Instructions:
Slice the STL file with your preferred slicer (Cura, PrusaSlicer, etc.)
Place the model flat on the build plate for maximum stability
Use supports only if overhangs require it
Optionally, use a brim if your printer struggles with adhesion
After printing, remove supports and smooth edges if needed
Optional Customization:
Adjust width or length to fit different book sizes
Modify the thumb clip angle for better page holding
Add decorative text or logo in slicer/CAD software
Notes:
Designed to keep pages open hands-free without damaging them
Ensure your printer is calibrated for best results