Dual 3.5 in HDD Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designed to hold two 3.5 Inch drives over top of each other without risking a fall.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 33
- Makes
- 0
- Views
- 287
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
I tried using the original single drive model (By Scubadiver48) to position my Drives in my Computer horizontally, However after multiple failures of the pegs on the side I switched to the model that inspired this one (By Zoltán Takács). But Without modifying the internals of the case I was Unable to make my drives fit or even hold them in a way I felt comfortable with. So I took both designs and Remixed them into this.
It offers the multi-drive layout was looking for with the rigidity and structure to give me the peace of mind to not worry about them falling and becoming damaged. Not to mention not having to mess with the Screwless Peg based design which constantly broke when I was trying to get my drive in place (Probably user error but still frustrating.) This lets you use basic HDD drive screws to hold the drives in place with the drives fitting snug inside.
Print Settings
Printer: Flashforge Adventurer 5m
Filament: Basic PETG worked for me But PLA should work as well
Quality: 0.2mm Layer Height
Walls: 3
Infill: 10% Rectilinear
Supports are required
Tree (Auto)
With a Top Z distance of .26mm and Bottom Z distance at .23mm
With the On build plate only option unchecked worked for me.
Filament used is 28.75 m
Print time was Roughly 3h 39mins
If you have Thoughts on how to improve it or if you want me to add more drive bays Let me know!
This is my first print I've uploaded please be kind :)