Swamp Things
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.96mm and the Actual Thickness is 2.88mm
Filaments Used:
#080a0d PLA PolyLite Black Transmission Distance: 0.3
#9b8979 PLA Jessie Premium Tan 64 Transmission Distance: 1
#4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3
#000000 PLA BambuLab Basic Black Transmission Distance: 1.5
#c00d1e PLA BambuLab Basic Red Transmission Distance: 5.1
#ff7713 PLA+ Esun Orange Transmission Distance: 5
#fce300 PLA BambuLab Basic Yellow Transmission Distance: 2.8
#e11021 PLA Copymaster 3D Red Transmission Distance: 4
This print uses 8 unique filaments
Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to Tan 64
At layer #12 (1.04mm) swap to Blue Gray
At layer #22 (1.84mm) swap to Black
At layer #25 (2.08mm) swap to Red
At layer #28 (2.32mm) swap to Orange
At layer #30 (2.48mm) swap to Yellow
At layer #31 (2.56mm) swap to Red
At layer #32 (2.64mm) swap to Yellow for the rest.