1 / 3
Dragon Clash Royale - Multiparts
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3D model ready to print =D, Separate pieces with interlocking parts to facilitate and improve the finish when printing
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 20
- Makes
- 0
- Views
- 153
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Attribution — Noncommercial
Tips:
In case you are printing in FDM with PLA material and you have not calibrated the tolerances, the fitting of pieces can be made easier
by applying a little heat with a hair dryer / heat gun to the male joints.
You can also leave the piece on the printing bed at 80° for about 5 to 10 minutes so that the material softens when fitting."