Meshroom S V2 DisplayPort Slot Cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Display port cover for the meshroom S V2. 2 displayports, no HDMI
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 7
- Makes
- 0
- Views
- 120
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Share Alike
I was inspired by the above, however there were a few issues that I did not like with it: using screws through the vent holes, not making use of the 2 larger holes to the left of the port, and having to use the bottom right screw that is used for the mobo tray.
The idea was taken, and I ran with it by re-using the display port area (although shifted to the right to be a little more centered and aesthetically pleasing). I dropped the HDMI as my board does not have HDMI.
Otherwise, the same P7A-P8T-BL DP extensions are used.
BOM:
4x M4x4mm (6 or 8mm would still work) countersunk socket heads
2x M3x6mm (or 8mm would still be fine) button head socket heads
3x M3x5x4mm heat set inserts (same as used by Voron printers)
1x M3x6mm (any other size is mostly fine, too) countersunk socket head