1 / 2
Raspberry Pi Zero 2W case with heat sink and GPIO cutout - HAT Standoff cut out
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
modified to support hat standoffs sizes and M2.5 screws in the bottom to provide stable hat mounting and screw in
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 14
- Makes
- 0
- Views
- 125
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Share Alike
Updated to support standard PI hat standoffs and better threaded screw in support.
Suggest doing a dry run screw test before assembling just to clear the threaded holes which makes it easier when you try to screw in with the case and hat assembled