PVS Gremlin V2 50 FPS budget 640 thermal monocular
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
New N6/P6 thermal cores, faster framerate and REAL pseudo colors over CVBS, 1:1 perception!
- Rating
- 5 / 5
- Likes
- 139
- Downloads
- 684
- Makes
- 2
- Views
- 7,264
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Join the PVS420 Discord where you can find the ongoing development of the PVS GREMLIN Including firmware, updates and much more.
The New N6 and P6 thermal cores available with a 9 and 13mm lens and 640 resolution comes with CVBS and USB out ( depeinding on Core model!). Featuring real pseudo colors over CVBS the Gremlin2 makes good use of it by also reducing the buttons used and dialing it down to a single thumb button + rotary encoder to pretty much cover all features available. Compared to the Mini2 Thermal cameras the power efficiency is off the charts delivering more then twice the runtime in tests! ( with 1600mAh 18350 Lithium Ion cell we are talking about 4 hours 40 minutes at 22°C room temperaturewith N6 core and 3 hours 45 Minutes with P6 core)
Real 50 fps for butte smooth operation!
!!!!IMPORTANT!!!!!!! the N6 core is pretty new and still being optimized. At the time of posting this design "Sunburn protection" is not yet part of the features built in the N6 core but will be added soon! Those who receive their camera without the sunburn protection feature will be able to update the firmware with a USB to UART cable.
09.02.2026
Sunburn is now Available and can be upated with a provided Software and Firmware image by using a USB to Serial adapter cable. Software, image file and how to you can get on my discord. Newer devices from factory will be sent with sunburn included.
__________________________________________________________________________________________________________

!!!IMPORTANT!!!!!!!! ONLY use protected 18350 cells!! There is no internal BMS in the Gremlin!!!!
You can also use disposable one time use CR123A 3 volt Lithium cells but ONLY if you DONT USE the external power supply!!!!!!
Use an external Power source (over LEMO connector) ONLY with the battery removed and dont exceed a voltage of 5 volt max!
I am not responsible if your Gremlin goes up in flames because you ignored this warning!
__________________________________________________________________________________________________________________
For the general building process refer to the detailed instructions of the Gremling V1. The schematic for wiring and Firmware will be different and can not be used on Version2! Obviously some buttons and the navigation switch is also not part of V2. Use common sense!
Depending on the tolerances of your printer the Rotary encoder needs quite some force to be pushed into its place, this is expected! You can use a bit of superglue on the cylindrical short shaft of the rotary encoder but make sure it is a glue that does not cure instantly but gives you a bit of time to push the thing all the way in. (Test fit it before you use glue!!)

Dont use the super liquid kind but gel like glue, if viscosity of the glue is to low it can find its way into the rotary encoder and render it useless!!! Solder the cables on the rotary encoder all from one direction!
When you place the Rotary encoder make sure the wires all point towards the front inside the case. The Reason being the Display frame sitting right above and there is no place for the cable to bend back without making a really sharp bend!

Parts list:
The following camera links are affiliate links. They won’t cost you anything extra, but they help support the project and its ongoing development. This allows me to recover a small portion of the costs while continuing to offer everything for free.
N6 50fps 640 9mm thermal core: Only available wtih 9mm lens.
https://s.click.aliexpress.com/e/_c3q2iFoJ
P6 50fps 640 thermal core: 9 and 13mm lens available! if you want 1:1 perception choose 13mm!
https://s.click.aliexpress.com/e/_c430JfS1
________________________________________________________________________________________________________
Copper disk for screw cap battery compartment: (23x1mm)
https://de.aliexpress.com/item/1005004750923794.html
NP18 18x Lens: The WHOLE lens and NOT just the core!!
NP20 20x Lens: (Optional instead of NP18 lens)
https://www.aliexpress.com/item/1005011848898697.html
Voltage booster: REMOVE A, B contact to set it to 5 volts!
Buffer capacitor for voltage booster: 16V 680uF 6x12mm
https://de.aliexpress.com/item/1005006804565476.html
Main Power switch:
https://de.aliexpress.com/item/1005009931587839.html
0,39" Display: with AV 3Color
0.5" Display: (Optional instead of 0.39" Display)
ESP32
https://de.aliexpress.com/item/1005008212278653.html
Rotary Encoder:
5PCS Rotary Encoder Switch EC11 With Push Switch 5Pin SMD Type Handle Length 10MM Plum Shaft
Push buttons: 6x6x4.3mm
https://de.aliexpress.com/item/1005002550688671.html?
5 Pin JST 1.25 connector for thermal core control:
https://www.amazon.de/vuniversum-1-25mm-Female-Stecker-Kupplung/dp/B0BNF6J1RJ
LEMO: Socket, 0B, 2P
LEMO: 0B with Bend relief, 2P
18350 lithium-ion protected cell 1600mAh:
https://de.aliexpress.com/item/1005008707918811.html
Battery contacts:
https://de.aliexpress.com/item/1005009033623918.html
Camera screw inserts:
https://de.aliexpress.com/item/4000296447009.html
Nickel plated metal stripe: 2M 0.15x8mm (cut into 4mm stripe for negative battery contact in battery chamber)
https://de.aliexpress.com/item/1005008677101885.html
Wiring cable: 28 or 30AWG
https://de.aliexpress.com/item/1005009046725725.html
Grub screws for focus ring and 3d printed lens screw insert: M2,5 x3mm
TPU cover lanyard screws: M3 6mm
Rubber Eye Piece: 3.8cm/ 38mm diameter color: 10
UPDATES:
11.04.2026 Added a TPU ring that gets shoved over the knurled exposed Eypiece focus adjuster ring. Using the "Color 10" Eype piece rubber grommit it give it a more unified look, also makes adjusting focus much easier!