1 / 4
Rieju/Gasgas threaded oil funnel
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Oil funnel for Rieju and old Gasgas with thread to thread into the motor oil port
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 26
- Makes
- 0
- Views
- 224
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print the funnel like in the picture, the overhang prints perfectly without supports.
I printed with a 0.4 mm nozzle at 0.25 mm layer height, but changed the thread layer height to 0.1 mm with the adaptive layer height feature in Orca Slicer. The thread turns out cleaner with a lower layer height.
Obviously you need to tilt the bike to use it...
