Nursery Planter Pot Riser
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.71 – €0.87 net (excluding VAT)
For file: Pot-riser_0.4n_0.25mm_PETG_COREONE_30m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.79 excluding VAT (range midpoint).
- Weight reported by the author
- 17 g
- Print time reported by the author
- 30 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Nursery planter pot riser to turn a regular planter pot into a self-watering pot
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 7
- Makes
- 0
- Views
- 76
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Nursery planter pot riser to turn a regular planter pot (9 x 9 x 9,5cm) into a self-watering pot.
Insert a cotton cord through the bottom holes. This will carry water from the water plate to the plant.
You can use any planter saucer as a water reservoir. Just fill the saucer with water, avoiding watering directly onto the compost. This keeps the water clean and the soil nicely moist for a long time.
I printed the riser using PETG with three perimeters.