Kpop Demon Hunters Barbie Mic and Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of Barbie Mic replacement plus my simple mic stand model for dolls like the Kpop Demon Hunters.
- Rating
- 0 / 5
- Likes
- 24
- Downloads
- 73
- Makes
- 0
- Views
- 252
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Action Figures & Statues
- License
- Creative Commons — Attribution — Noncommercial
This is a microphone stand designed for the official Mattel Kpop Demon Hunters Barbie style dolls.
I could not find anything similar, so I created this model using simple shapes in PrusaSlicer.
Printed in Jessie PLA Purple Ice
0.1mm Fast Detail
3 perimeters
15% honeycomb infill (really only applies to the base)
Supports and Brim on
You will need organic supports for the mic. You may need organic supports for the mic holder. The angle is only 35deg but the bore holes did not come out round without supports, making a difficult fit. YMMV.
I also needed a brim for the shaft/pole of the stand, or the object would curl and peel off the sheet.
Then, just trim support/brim, put shaft on base, put holder on shaft, add mic, and instantly become the best dad or mom ever.
It should work for other Barbies or any other similar doll, but some scaling might be required because the Kpop Demon Hunters figures are slightly taller than a typical Barbie. The stand aims at a face roughly 10 inches high. The shaft/pole of the stand is 9.5 inches, simply adjust the length as needed.
The mic holder portion is designed for Barbie microphones with a channel for the standard Barbie hand accessory clip shape. The remixed model here is perfect, but others should work too.