Dandadan/Ken Takakura - HueForge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A remake of Ken from Dandadan using HueForge.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 12
- Makes
- 0
- Views
- 50
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x112.5mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.48mm and the Actual Thickness is 2.08mm
#0f1713 PLA Black Transmission Distance: 0.1
#b10000 PLA Prusament Red Lipstick Transmission Distance: 3.5
#ffffff PLA eSun White Cold Transmission Distance: 1.6
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Red Lipstick
At layer #11 (0.96mm) swap to White Cold
At layer #15 (1.28mm) swap to Red Lipstick
At layer #24 (2mm) swap to Black for the rest.