1 / 5
Side Plates for Unika's crossbow
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Plates that I made to go over the sliding rails in my Unika project
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 7
- Makes
- 0
- Views
- 24
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution — Share Alike
This is made to look like the side panel inside of Unika's weapon from Guilty Gear -Strive-
I made this to fit with a sliding mechanism that goes inside it but is not needed. (Link for that -
)
It was made to fit on 2 plates for a side (4 total, 5 if you print the spacer separate)
This is designed to go in a pair so print 2 of both side panels.
There are spots inside them to fit 6x2mm magnets inside so pause it at the layer and place them inside if desired. The spacer is made to interfere fit with the rail.