1 / 2
Deckel für 68mm Doppel-Gerätedose / lid for drywall double mounting plate box — image 1
1 / 2

Deckel für 68mm Doppel-Gerätedose / lid for drywall double mounting plate box

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Deckel für 68mm Doppel-Gerätedose / lid for drywall double mounting plate box

Rating
0 / 5
Likes
3
Downloads
5
Makes
0
Views
58
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial

Due to the installation situation, I converted a double device box into a junction box and needed a cover for it.

The cover has a 1 mm high collar around the edge to cover the gap to the wall for protruding boxes. If the collar is not needed, it can be removed in the slicer using the “Cut” tool. To do this, place the cover with the front on the printing plate and set the cutting height to 2 mm.

I printed the whole thing with the “Generic PETG” filament profile and the “0.02 mm BALANCED” printing profile. The BGCODE for the Prusa Core One can be found in the files.

//DE

Auf Grund der Einbausituation habe ich eine Doppel-Gerätedose in eine Verteilerdose umfunktioniert und brauchte dafür einen Deckel

Der Deckel hat einen 1mm hohen umlaufenden Kragen um den Spalt zur Wand bei hervorstehenden Dosen zu bedecken.  Wenn der Kragen nicht benötigt wird, kann er im Slicer mit dem Werkzeug "Schneiden" entfernt werden. Dazu den Deckel mit der Front auf die Druckplatte legen und die Schnitthöhe auf 2mm festlegen.

Gedruckt habe ich das ganze mit dem Filament-Profil "Generic PETG" und dem Druckprofil "0,02mm BALANCED". Die BGCODE für den Prusa Core One ist bei den Dateien zu finden.