Original saber hilt (Hunter)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
5th addition to the saber collection. Assembly required.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 14
- Makes
- 0
- Views
- 62
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution
First major assembly saber hilt. Made up of 70 pieces. No glue required, however it is my first attempt and depending on print and tolerances you may need or want glue in some areas. I assembled mine without. It's a hand and a half hilt so if it's too long for you there's an optional shorter shaft. Until I create an assembly instructions think of it like a puzzle. You will need..
18x Grip
39x Trim Button
2x Fin1
2x Fin2
2x Crystal Wall
and 1x of all other parts
Only non printed pieces you will need are..
-a small 3/32" (2.38-2.40mm) rod or dowel about 1 1/4" long. I used 3/32" brass rod from Ace.
-a #6-32 x 1/2" machine screw and nut