1 / 1
IKEA Billy connector
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Connect IKEA Billy bookcases together for a neater look
- Rating
- 5 / 5
- Likes
- 16
- Downloads
- 90
- Makes
- 0
- Views
- 395
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Living Room
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
IKEA Billy bookcases tend to stand a bit askew next to each other, which can be pretty jarring.
This connector goes on the top and holds them together.
Make sure they're still sitting securely on the floor!
Usage:
Put the connector on.
Put two screws into the connector's holes and drive them into the pre-made holes on the bookcases.
Print:
PLA or PETG
Use 3 or even 4 perimeters for extra sturdiness.
Print it with the flat surface (top) down.
No support or any other special consideration is necessary.