Curtain rail wall mount (Gordijnrail muursteun)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple, elegant, wall mount for standard curtain rods. Mounts the curtains 8 cm from the wall.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 6
- Makes
- 0
- Views
- 26
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Open Community License v1
Description
Simple design to hang your curtain rails on the wall. A lot more elegant than the basic version they sell at the hardware store.
This will hang your curtain rail 8cm from the wall (center of the rail)
Specs
The fit on the rail is very snug, so the rail won't move about. Most of these rails are bent outward a little at the ends, I could push them together with my fingers to slide the mount on.
My rails are 150cm long, and I use two of these mounts, spaced 25 cm from the ends of the rail. It holds up perfectly for long heavy curtains. The curtains are 240cm long.
The screw holes are for 4,5mm x 45mm screws (although the length shouldn't matter for the screw head size)
Print settings (0.4 mm nozzle)
Print in PETG or better for best results
5 walls, 5 bottom layers, 5 top layers
25% infill (I use cubic or gyroid for 3d stability)
Use supports, auto generated 'organic' style
I added a picture of how the supports should look like in the slicer
Regular speeds should work, but depending on your printer you could choose to print slower