Celestron NexStar 6SE Focuser - Nema 17 or 28BYJ-48 motor
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Focus motor mount remixed for the Celestron NexStar 6SE
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 20
- Makes
- 0
- Views
- 190
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Physics & Astronomy
- License
- Creative Commons — Attribution — Share Alike
A quick remix of the awesome work done by PapaSpiro to fit the NexStar 6SE. I've included a small test model so that you can see if the bolt pattern lines up with your mounting holes.
UPDATED: I was running into issues with the 28BYJ motors, so have added a mounting tube and coupler to use a Nema 17 sized motor (I went with a pancake version to keep the bulk down).
The Nema 17 mounting tube will print motor side down with supports.
You could probably get away with the original focus plate screws, but I switched mine for some M3x10mm for a more secure hold with the adapter plate.