MySondy Go – A Pocket Tool for Radiosonde Hunting
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Dustproof 3D-printed enclosure for MySondy Go radiosonde tracker, with LiPo battery, LED light pipes and TPU dust cover.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 45
- Makes
- 0
- Views
- 200
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a custom-designed 3D-printed enclosure for the MySondy Go radiosonde hunting device based on the TTGO LoRa32. The housing is optimised for outdoor, real-world use: it protects the electronics from dust while keeping all essential connectors accessible, including USB, microSD card, and the SMA antenna connector.
The enclosure accommodates a single-cell Li-Po battery (typically 650–1000 mAh, but tested with a 1600 mAh cell; approx. 50 × 60 × 5 mm), includes internal mounting for a buzzer, and features a flexible TPU dust cover for the connectors. Red and blue status LEDs are brought to the surface using simple light pipes made from short pieces of clear 1.75 mm nylon filament, making charging and power status visible without compromising dust resistance. Designed for easy printing and practical field use during radiosonde recovery.
More details about this project: https://motleyscience.com/2026/01/29/building-the-mysondy-go-a-pocket-tool-for-radiosonde-hunting/