Small (7.5cm) Stylus for Resistive LCD Touchscreen + Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small (7.5cm) stylus and holder I made for use with smaller resistive LCD touchscreens, as found on the AD5X.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 29
- Makes
- 0
- Views
- 98
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
This stylus is based on the stylus that came with a tiny 3.5" resistive touchscreen I bought many years ago.
The stylus should be printed laying down on the flat side, with support under the tip only.
It can be mounted horizontally, or vertically. The flat side minimizes rolling and the flared ferrule prevents slipping.
It should work for any resistive touchscreen.
Why:
The touchscreen on my Flashforge AD5X is not very responsive to my fat fingers. This stylus makes it easier to hit the smaller buttons more accurately. (The racing stripe is optional. :)