1 / 5
Onyx BOOX Go (Color) 7 transport-case — image 1
1 / 5

Onyx BOOX Go (Color) 7 transport-case

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A case for the Go color 7 with or without cover and pen.

Rating
0 / 5
Likes
6
Downloads
19
Makes
0
Views
286
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

A case for the Go color 7 with or without cover and pen. I made this, because once an e-reader screen broke in my backpack, while in the manufacturers cover.

For the version with cover you  need to print out all the parts twice.

  1. For the hinge you need 1 or 2 pieces of M4 threaded rod which you have to cut to the correct length a bit more than 160mm.

  2. You can use a saw or Dremel to create a slot(for a screwdriver) on one side and put on a locknut or lock 2 nuts against each other .

  3. Add a (lock)nut on the other side you can simply slide in a 7mm M4 (lock)nut .

  4. Slide/turn in the threaded rod, I used a powered drill for most of the screwing, and did only the last bit with the screwdriver.

  5. Now you need 20 6x1.5mm Magnets, which are glued in on the sides.