Reolink Home Hub Wallmount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Used this to hang my Home Hub nice and tidy onto a plywood wall (UPDATED 2026-09-27).
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 77
- Makes
- 0
- Views
- 194
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Use this simple shelf to put your Reolink Home Hub on a wall.
The Home Hub is placed sideways to leave access to the cables on the back. It fits very firmly, while the LED indicator/button remains visible and the ventilation from below does not get blocked.
I used three screws to put this onto a piece of plywood which contains all my home network stuff.
Print with default settings and whatever filament you like (in the photos I used Overture matte PLA). No supports required.
Updates 2026-09-27:
If you want put your Home Hub the other way around, print the MIRRORED 3D-model provided below.
I also made a model to put it on an IKEA Skadis wall, check it out.