1 / 1
DeWalt 6 gallon hose adapter for Oneida Dust Deputy — image 1

DeWalt 6 gallon hose adapter for Oneida Dust Deputy

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

DeWalt 6 Gallon Wet/Dry Vacuum Host to Oneida Dust Deputy Coupler

Rating
0 / 5
Likes
1
Downloads
13
Makes
0
Views
119
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Public Domain

This is a coupler/adapter/whatever so that I could connect my new wall mount DeWalt DXV06G vacuum to my existing Oneida Dust Deputy separator.  Originally the Dust Deputy was just for my wood working endeavors but I found that it works for a LOT of things and lets the bag/filter in the vacuum last longer. 

For some inexplicable reason DeWalt has what I would consider an "odd size" hose end.  All my other stuff is 2" to 2.5" but the DeWalt is SUPPOSED to be 1-7/8".  It's not exactly that.  The hose may be.. the end is not.  And all the other models of adapters I looked for on here were not working.  

The Oneida can take 2" ish (~50mm) connections on the Outside Diameter (OD)  and the DeWalt end measures in at just shy of 45mm on the OD.  Most of the models I found were for 47mm which just wasn't working. 

So... I give to you Version 1 of "I need to have this work now and not be pretty". 50mm Inside Diameter (ID) on one end and 45mm ID on the other.  

It's a straight run with ~40mm of length on either side of the middle piece (which was just to give something to grab. 

Works fine for me without having to clamp or tape anything. 

The example I made is Ender PLA made on a Prusa MK4.

I did use a brim on the inside and outside as well as supports from the bed (For some reason today the PLA did NOT want to adhere to the bed (likely due to the thin wall of the model)). 

Tags