Interchangeable knitting needle key handle
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.30 – €0.37 net (excluding VAT)
For file: Needle key handle_0.2mm_PLA_with_8mm_brim.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.34 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 26.4 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Handle to attach to an interchangeable knitting needle key to make it easier to hold and use.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 6
- Makes
- 0
- Views
- 53
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
Handle with a small hole to insert an interchangeable needle key. Print upright with a healthy brim (I use 8mm) to ensure stability.
After printing, hold a needle key by the loop end with a pair of pliers and use a heat gun or other heat source to warm up the end of the needle key that came with your needle set. Once it's hot, insert it into the handle and hold it in place to let it cool slightly. Then use a pair of pliers or wire cutters to snip off the loop.
Depending on how long you want the pin portion to be you can get 2-3 complete tools out of a single needle key.