ObiWanStenobit Case & Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A modular 3D-printable case system designed specifically for the ObiWanStenobit split stenographic keyboard.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 56
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Standard Digital File License
This case is designed with protection and portability in mind, while maintaining a clean and functional mechanical assembly.
Full project repository: https://github.com/ivndbt/obiwanstenobit
Project background and design history: https://ivndbt.com/makes/ows/ows.html
Included parts
Left split keyboard case
Right split keyboard case
Controller PCB case (top + bottom)
Protective holder for transport and storage
Required hardware
2x M2x10mm Phillips pan head screws
8x M2x4mm Phillips pan head screws
10x M2 nuts
50cm paracord 550
1x sping buckle
Printing notes
When printing the left and right split cases, it is mandatory to insert a pause in the slicer at the layer immediately before the nuts are covered.
This allows the M2 nuts to be placed into their dedicated slots before resuming the final layers of the print, ensuring proper mechanical fixation without post-processing.
License notice
This project is licensed under CERN Open Hardware Licence v2 (CERN-OHL-S).
The license selection on Printables is for platform compatibility only.
The legally binding license is the CERN-OHL v2 as published in the GitHub repository and included in the files.