Railcore Drag Chain Cover friendly inside rail mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modified rail-mount piece for cynical_owl's railcore drag chain ends to be cover-interface friendly.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 6
- Makes
- 0
- Views
- 110
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
Modified rail-mount piece for cynical_owl's railcore drag chain ends to be cover-interface friendly.
Print Settings
Printer:
Railcore 300ZLT
Rafts:
No
Supports:
No
Resolution:
.1
Infill:
15
Filament:
Atomic PETG
Starry Night
Notes:
I've got an MRW cover on my rig, which requires an interface kit to sit on. I'm using the one by jstevewhite found here. along with my own mod to allow filament to pass through it. While this set up is working well for me, it covers the top side of the rails all the way around making it incompatible with with cynical_owl's drag chain ends.
This remix allows the rail-mounted end to attach to the inside of the rail rather than the top making it cover-friendly.Things you'll need:
- Other end (extruder side) from cynical_owl's original version
- 2 x countersunk M3x12mm screws to connect.
If anyone hates the countersunk screws, HMU and I can modify for socket cap screws.
Category: 3D Printer Accessories