Simple shelf bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple shelf bracket. 75mm x 30mm Intended for 10-12cm deep shelves.
- Rating
- 5 / 5
- Likes
- 22
- Downloads
- 114
- Makes
- 2
- Views
- 444
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple shelf bracket. 75mm x 30mm
Intended for 10-12cm deep shelves.
Print Settings
Printer:
Railcore 300 ZLT
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
15% 3D Honeycomb
Filament:
Overture PETG
Marble
Notes:
Made this to support small shelves holding misc. plastic organizers full of screws, nuts, washers, wire crimp ends etc. Actual shelves will be made from reclaimed pallet wood.
Increase infill % if you need more strength.Will work nicely with either M2.9 oval head screws or M3 self-tapping countersunk screws so they fit flush with face.
Use appropriate drywall anchors if you're going that route.
Category: Household